Product ID:COLORING AGENT - WHITE, 509
MSDS Date:09/01/1994
FSC:8010
NIIN:00N025004
MSDS Number: CDHTV

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 513-489-7600

Cage: 18731

Telephone: 513-489-7600

Cage: 18731

2-PENTANONE, 4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL) VP

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 22%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CONTACT W/VAPOR MAY
RESULT IN IRRIT, REDNESS, TEARING & BLURRED VISION. SKIN: CONTACT
W/MATL MAY RESULT IN IRRIT OF SKIN. INHAL: EXCESSIVE INHALATION OF
VAPORS MAY CAUSE NASAL & RESPIRATO RY IRRIT. INGEST: INGESTION OF
THIS MATL MAY CAUSE GI IRRIT, NAUSEA, DIARRHEA & VOMITING. CHRONIC:
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: VAPOR FROM THIS MATL IS IRRIT TO
EYES, NOSE & THROAT. CONTACT W/MATL IN EYES OR SKIN CAN CAUSE
DRYNESS & IRRIT. OVEREXP TO DIACETONE ALCOHOL HAS BEEN SUGGESTED AS
A CAUSE OF FOLLOWING EFFECT S IN LAB ANIMALS & MAY AGGRAVATE
PRE-EXISTING DISORDERS OF THESE ORGANS IN HUMANS: ANEMIA, LIVER
ABNORMS, KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:OVEREXPOSURE TO DIACETONE ALCOHOL
MAY AGGRAVATE PRE-EXISTING DISORDERS OF THESE ORGANS: ANEMIA, LIVER
ABNORMALITIES, KIDNEY DAMAGE.

First Aid:EYES: FLUSH IMMEDIATELY W/LARGE AMOUNTS OF WATER FOR AT LEAST
15 MIN. SEE MD FOR MED TREATMENT. SKIN: IMMEDIATELY WASH AFFECTED
AREA W/SOAP & WATER. REMOVE CONTAMD CLTHG. CONSULT MD IF IRRIT
DEVELOPS. INHAL: REMOVE PERSON TO FRESH AIR. RESTORE BREATHING.
KEEP PERSON WARM & QUIET. TREAT SYMPTOMATICALLY. GET MED ATTN.
INGEST: KEEP PERSON WARM & QUIET. CONSULT MD OR POISON CONTROL
CENTER IMMEDIATELY.

Flash Point:146F,63C
Lower Limits:1.8%
Upper Limits:6.9%
Extinguishing Media:FOAM, CARBON DIOXIDE AND DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . WATER MAY BE USED TO COOL CONTAINERS TO PREVENT
PRESSURE BUILD-UP WHICH MAY RUPTURE CONTAINERS.
Unusual Fire/Explosion Hazard:HANDLE AS A COMBUSTIBLE LIQUID.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE THE
AREA. WEAR PROTECTIVE EQUIPMENT. AVOID BREATHING VAPORS. CONTAIN
SPILL. COLLECT WITH INERT ABSORBENT AND REMOVE. DISPOSE OF
PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE MATL IN A COOL, WELL-VENTD AREA.
DO NOT STORE AT TEMPERATURES ABOVE 75F. DO NOT USE OR STORE NEAR
HEAT, SPARKS, OR OPEN FLAME. KEEP (SUPDAT)
Other Precautions:IF PRODUCT IS TO BE SANDED, THE PEL/TLV OF 10 MG/M3
FOR NUISANCE DUSTS SHOULD BE OBSERVED. KEEP OUT OF REACH OF
CHILDREN. DO NOT TAKE INTERNALLY. AVOID CONTACT WITH EYES AND SKIN.

Respiratory Protection:USE NIOSH APPROVED RESPIRATORS DESIGNED TO
REMOVE PARTICULATE MATTER AND ORGANIC SOLVENT VAPORS.
Ventilation:GEN DILUTION OR LOCAL EXHAUST VENT SHOULD BE PROVIDED TO
KEEP EXPOS BELOW ACCEPTABLE LIMITS & TO KEEP SOLVENT (SUPDAT)
Protective Gloves:NEOPRENE OR NATURAL RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
IMPERMEABLE CLOTHING SHOULD BE WORN TO PREVENT PRLNGD/RPTD CONTACT
(SUPDAT)
Work Hygienic Practices:AWAYS WASH HANDS AFTER USING THIS MATERIAL AND
BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
WASTE DISP METH: DISPOSING OF MATERIAL, REFER TO HAZARD INFO IN OTHER
SECTIONS OF MSDS. HNDLG/STOR PRECS: CONTAINERS TIGHTLY CLOSED.
AVOID CONTACT W/INCOMPATIBLE MATLS. VENT: VAPORS BELOW THE LOWER EX
PLOSION LIMIT. OTHER PROT EQUIP: OF WETMATERIAL W/SKIN.

Boiling Pt:B.P. Text:337F,169C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.92
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:32

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, ALKALI AND OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES, IGNITION SOURCES AND
CONTACT WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:FUMES MAY BE PRDCED WHEN MATL IS
HEATED TO DECOMP. FUMES MAY CNTN CARBON MONOXIDE, CARBON DIOXIDE &
VARIOUS HYDROCARBS.

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL REGS.
WASTE FROM THIS PRODUCT MAY BE HAZARDOUS AS DEFINED UNDER RCRA
40CFR 261. WASTE MUST BE TESTED FOR IGNITABILITY TO DETERMINE
APPLICABLE EPA HAZARDOUS WAST E NUMBERS. BEFORE ATTEMPTING CLEAN-UP
OR (SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.